Menu
Shop
Showing 1–30 of 113 results
-
Service – Cutting Holes In Containers Before Delivery
$0.00Container Size ModificationsSKU CUTTINGAdd to cartPrice: $10 per linear foot of cut.
Time Taken: Depending on the amount of cutting and the season, anywhere from one day to three weeks. -
Accessory Hook – 1200AH
$9.99Container Size ShelvingSKU 1200AHAdd to cartIntended for use with the flex shelf part numbers 1210SA, 1212SA or 1200PT.
-
Stay Strap – SS66
$13.00Container Size ShelvingSKU SSAdd to cartThis product makes it easy to hold the lowest arm of a bracket and tighten it down using the lower lashing ring. Stay Straps are recommended for use during transport and can help to keep shelving stable. Stay straps are not required to use shelving brackets.
-
T-Bar (Bottom stabilizing bar)
$15.00Container Size ShelvingSKU TBARAdd to cartThis is a replacement part. It is the lower stabilizing t-bar pictured behind the stay-strap and is included with each bracket when purchased.
-
Bicycle Hook
$21.00Container Size ShelvingSKU BCHAdd to cartFor use with part numbers 1000B, 2000AB, & 1200AB.
-
External Bracket Mount
$30.00Container Size ShelvingSKU EBMAdd to cartExternal Bracket Mount attaches to the outside corner cube of the container and allows for the use of the shelving and pipe racks on the external walls of the container.
-
**ONLY AVAILABLE FOR PICK UP** Shelf Bracket – 1210SA
$40.71Container Size Plan Table, ShelvingSKU 1210SAAdd to cartTHIS ITEM IS DISCONTINUED.
THIS ITEM IS AVAILABLE FOR PICK UP ONLY
The 1210SA arm bracket provides a shelf 20" deep when used with a flex shelf backbone. Uses two 2"x10" boards to make the shelf (not included).
-
D Ring Drop
$45.00Container Size ShelvingSKU DDROPAdd to cartA minimum of 2 extensions required for most applications. To be used with 2208, 2210, 2212, 3208, 3210, 3212, 4210(high cube containers), 2000AB, 10008, 1212.
-
Block Lock For Low Profile Lock Boxes
$50.00Container Size Container AccessoriesSKU BLOCKLOCKAdd to cartBlock locks are much easier to use than a standard padlock as it's tough to get a traditional padlock onto the hasp of a low profile lockbox.
-
Master Puck Lock For Bolt On Lock Box
$50.00Container Size Container AccessoriesSKU PUCKLOCKONLYAdd to cartMaster puck lock specifically fits our bolt-on puck lock lockbox.
-
Bridge Fitting
$55.00Container Size Container AccessoriesSKU BRIDGEFITTINGAdd to cartPrice: $55
Ships: Nationwide
Size: Threaded rod is approximately 10" long. -
Two Shelf Bracket – 2208
$75.00SKU SB2208Add to cartThese brackets provide a shelf depth of 14.5" and a load rating of 1200lbs per bracket. At least 2 brackets required to make a shelf.
-
Two Shelf Bracket – 2210
$77.00SKU 2210Add to cartThese brackets provide a shelf depth of 18.5" and a load rating of 1100lbs per bracket. At least 2 brackets required to make a shelf.
-
Two Shelf Bracket – 2212
$79.00SKU 2212Add to cartThese brackets provide a shelf depth of 22.5" and a load rating of 1000lbs per bracket. At least 2 brackets are required to make a shelf.
-
Three Arm Pipe Rack – 3000
$87.00SKU 3000Add to cartPipe bracket arms extend out from the bracket backbone at a 30° angle. Perfect for holding pipes and other long ridge objects. Each bracket has a load rating of 1000lbs.
-
Three Shelf Brackets – 3208
$97.00SKU 3208Add to cartThese brackets provide a shelf depth of 14.5" and a load rating of 1200lbs per bracket. At least 2 brackets are required to make a shelf.
-
Three Shelf Brackets – 3210
$99.00SKU 3210Add to cartThese brackets provide a shelf depth of 18.5" and a load rating of 1100lbs per bracket. At least 2 brackets required to make a shelf.
-
Twist Locks
$99.00Container Size Container AccessoriesSKU TWISTLOCKAdd to cartFor securing containers together that are stacked on top of each other.
-
Three Shelf Brackets – 3212
$103.00SKU 3212Add to cartThese bracket provide a shelf depth of 22.5" and a load rating of 1000 lbs per bracket. At least 2 brackets required to make a shelf.
-
Four Arm Pipe Rack – 4000
$106.00SKU 4000Add to cartPipe bracket arms extend out from the bracket backbone at a 30° angle. Perfect for holding pipes and other long ridge objects. Each bracket has a load rating of 1000lbs.
-
27″ x 27″ Aluminum Curb Ramp
$110.99Container Size RampsSKU 2727ACRAdd to cartShips: Nationwide
Size: 27”x27”
Capacity: 750lbs
For containers and steps up to 8″ high. -
Four Shelf Bracket – 4210
$123.00SKU 4210Add to cartThese brackets provide a shelf depth of 18.5" and a load rating of 1100lbs per bracket. At least 2 brackets required to make a shelf.
-
Apparel/Bike Rack Kit w/ 37″ Backbone
$124.00Container Size Plan Table, ShelvingSKU 6121.4Add to cart1X - 37" Backbone
1X - T-Bar Stabilizer
1X - Bike/Apparel Rack (Single Arm)
1X - Ringpin
3X - Bicycle Storage Hooks
At least 2 kits are needed. Lumber NOT included. -
**ONLY AVAILABLE FOR LOCAL PICK UP**File Storage Brackets – 4210FS
$125.00SKU 4210FSAdd to cartThese brackets provide a shelf depth of 18.5" and a load rating of 1800lbs per bracket. At least 2 brackets required to make a shelf.
-
Five Arm Pipe Rack – 5000
$125.00SKU 5000Add to cartPipe bracket arms extend out from the bracket backbone at a 30° angle. Perfect for holding pipes and other long ridge objects. Each bracket has a load rating of 1000lbs.
-
Planning Table Kit
$127.00Container Size Plan Table, ShelvingSKU 6136Add to cart1X - 80" Backbone
1X - T-Bar Stabilizer
1X - Planning Table (Single Arm)
1X - Ringpin
At least 2 kits are needed. Lumber NOT included. -
Four Shelf Brackets – 4212HC
$129.00SKU 4212HCAdd to cartThese brackets provide a shelf depth of 22.5" and a load rating of 1000lbs per bracket. At least 2 brackets required to make a shelf.
-
2″ x 8″ Flex 2 Shelf Kit
$132.00Container Size Plan Table, ShelvingSKU 2108Add to cartThis Kit Includes:
1X - Backbone: 80"
1X - T-Bar Stabilizer
2X - 2" x 8" Flex Shelf Brackets
2X - Ringpins
At least 2 kits are needed to make shelves. -
2″ x 10″ Flex 2 Shelf Kit
$134.00Container Size Plan Table, ShelvingSKU 2110Add to cartThis Kit Includes:
1X - Backbone: 80"
1X - T-Bar Stabilizer
2X - 2" x 10" Flex Shelf Brackets
2X - Ringpins -
2″ x 12″ Flex 2 Shelf Kit
$136.00Container Size Plan Table, ShelvingSKU 2112Add to cartThis Kit Includes:
1X - Backbone: 80"
1X - T-Bar Stabilizer
2X - 2" x 12" Flex Shelf Brackets
2X - Ringpins
At least 2 kits are needed to make shelves.
Showing 1–30 of 113 results
