Menu
Filter By Type
These brackets provide a shelf depth of 14.5" and a load rating of 1200lbs per bracket. At least 2 brackets required to make a shelf.
These brackets provide a shelf depth of 18.5" and a load rating of 1100lbs per bracket. At least 2 brackets required to make a shelf.
These brackets provide a shelf depth of 22.5" and a load rating of 1000lbs per bracket. At least 2 brackets are required to make a shelf.
These brackets provide a shelf depth of 14.5" and a load rating of 1200lbs per bracket. At least 2 brackets are required to make a shelf.
These brackets provide a shelf depth of 18.5" and a load rating of 1100lbs per bracket. At least 2 brackets required to make a shelf.
These bracket provide a shelf depth of 22.5" and a load rating of 1000 lbs per bracket. At least 2 brackets required to make a shelf.
These brackets provide a shelf depth of 18.5" and a load rating of 1100lbs per bracket. At least 2 brackets required to make a shelf.
These brackets provide a shelf depth of 22.5" and a load rating of 1000lbs per bracket. At least 2 brackets required to make a shelf.
These brackets provide a shelf depth of 18.5" and a load rating of 1800lbs per bracket. At least 2 brackets required to make a shelf.
Pipe bracket arms extend out from the bracket backbone at a 30° angle. Perfect for holding pipes and other long ridge objects. Each bracket has a load rating of 1000lbs.
Pipe bracket arms extend out from the bracket backbone at a 30° angle. Perfect for holding pipes and other long ridge objects. Each bracket has a load rating of 1000lbs.
Pipe bracket arms extend out from the bracket backbone at a 30° angle. Perfect for holding pipes and other long ridge objects. Each bracket has a load rating of 1000lbs.
The loft shelf spans the width of the container and creates a wide (48") single shelf that hangs about 27" below the container ceiling.
2X - 37" Backbone
2X - T-Bar Stabilizer
2X - Bike/Apparel Rack (Single Arm)
2X - Ringpin
6X - Bicycle Storage Hooks
Lumber NOT included.
This product makes it easy to hold the lowest arm of a bracket and tighten it down using the lower lashing ring. Stay Straps are recommended for use during transport and can help to keep shelving stable. Stay straps are not required to use shelving brackets.
A minimum of 2 extensions required for most applications. To be used with 2208, 2210, 2212, 3208, 3210, 3212, 4210(high cube containers), 2000AB, 10008, 1212.
For use with part numbers 1000B, 2000AB, & 1200AB.
External Bracket Mount attaches to the outside corner cube of the container and allows for the use of the shelving and pipe racks on the external walls of the container.
This is a replacement part. It is the lower stabilizing t-bar pictured behind the stay-strap and is included with each bracket when purchased.
If you have technical questions about our shelving products feel free to give us a call. We love to answer your questions! Keep in mind, however that we CAN NOT take orders over the phone. 800-517-0012
A minimum of two brackets are required to make a shelf. More brackets can be added to increase load capacity.
Brackets are shipped throughout the U.S.A.
No lumber is not provided.
The brackets are hung from lash rings welded inside of the container. You should make sure your container has lash rings before ordering.
If you have technical questions about our shelving products feel free to give us a call. We love to answer your questions! Keep in mind, however that we CAN NOT take orders over the phone. 800-517-0012
Shelving Brackets Are Sold Individually. • Two Brackets Are Required To Make A Shelf.
*Exception: Loft Brackets Are Sold In A Pair of 2 Brackets
